How do I turn the DJI Mavic 4 Pro motors on and off manually?
Publicado: Julio 25, 2025, 8:27 am
How do I turn the DJI Mavic 4 Pro motors on and off manually: Turning on the motors manually on the DJI Mavic 4 Pro is done through a specific combination of movements with the remote controller sticks, known as CSC (Combination Stick Command). There are several variations, but by default, simply pushing both sticks in and down simultaneously starts the motors spinning. This method ensures that the motors are started intentionally, reducing the risk of accidental activation while handling the controller or carrying the drone.
Once the motors are started, the drone is ready to take off using the throttle stick or the auto-takeoff option. To stop the motors manually, there are two methods available: the first is to hold the left stick (throttle) all the way down after landing until the motors turn off; the second method is to perform the CSC combination again once the drone has landed and is stationary. Both procedures are safe as long as the drone is properly positioned on the ground.
Manually starting and stopping the motors is especially useful for experienced pilots who require more precise control over the start and end of each flight, such as during technical inspections, filming in confined spaces, or ground testing. It also allows the drone to be operated without relying on automated functions, which is beneficial in situations where the DJI Fly app presents interference or response delays.
Mastering manual control of starting and stopping the motors not only increases the pilot's operational autonomy but also provides greater safety by ensuring that each activation or stop of the drone is carried out under direct supervision. It also offers a fallback solution in the event of automated control system failures, strengthening the user's response capabilities to unforeseen events in the field.
Once the motors are started, the drone is ready to take off using the throttle stick or the auto-takeoff option. To stop the motors manually, there are two methods available: the first is to hold the left stick (throttle) all the way down after landing until the motors turn off; the second method is to perform the CSC combination again once the drone has landed and is stationary. Both procedures are safe as long as the drone is properly positioned on the ground.
Manually starting and stopping the motors is especially useful for experienced pilots who require more precise control over the start and end of each flight, such as during technical inspections, filming in confined spaces, or ground testing. It also allows the drone to be operated without relying on automated functions, which is beneficial in situations where the DJI Fly app presents interference or response delays.
Mastering manual control of starting and stopping the motors not only increases the pilot's operational autonomy but also provides greater safety by ensuring that each activation or stop of the drone is carried out under direct supervision. It also offers a fallback solution in the event of automated control system failures, strengthening the user's response capabilities to unforeseen events in the field.